Oracle Linux 7 and a new YUM configuration since January 2019

For quite some time I used to have a configuration file /etc/yum.repos.d/public-yum-ol7.repo managing my package sources in lab VMs. Today I noticed that this configuration file is deprecated, and has been replaced by a new model. This is explained in the Oracle Linux 7 administrator guide and a few other sources I totally missed. I thought I’d show you the full story in this post before I go and change all my Ansible scripts :)

State of play before

To repeat the scenario I just went through, I created a new machine, server3, based on the stock Oracle Linux 7.6 image. After its initial boot I log in to the console to perform a yum upgrade.

This is of course only acceptable in a lab environment, anything deployed in an enterprise environment would use a local, change-controlled mirror based on Spacewalk or comparable software.

Prior to starting the actual upgrade, let’s have a look at how things were before the new model was rolled out. There is only a single repository configuration file present after the initial reboot and without any calls to yum whatsoever:

[ansible@server3 ~]$ ls -l /etc/yum.repos.d/
total 16
-rw-r--r--. 1 root root 13093 Nov 2 07:02 public-yum-ol7.repo
[ansible@server3 ~]$


Next I run the upgrade command, I have removed a lot of output for clarity

[ansible@server3 ~]$ sudo yum upgrade
Loaded plugins: ulninfo
ol7_UEKR5 | 1.2 kB 00:00
ol7_latest | 1.4 kB 00:00
(1/5): ol7_UEKR5/x86_64/updateinfo | 27 kB 00:00
(2/5): ol7_UEKR5/x86_64/primary | 2.4 MB 00:00
(3/5): ol7_latest/x86_64/group | 659 kB 00:00
(4/5): ol7_latest/x86_64/updateinfo | 767 kB 00:00
(5/5): ol7_latest/x86_64/primary | 11 MB 00:00
ol7_UEKR5 120/120
ol7_latest 11799/11799
Resolving Dependencies
--> Running transaction check
---> Package NetworkManager.x86_64 1:1.12.0-6.el7 will be updated
---> Package NetworkManager.x86_64 1:1.12.0-8.el7_6 will be an update

[ ... more output ... ]

Updating : 1:grub2-pc-2.02- 15/85
Updating : cronie-1.4.11-20.el7_6.x86_64 16/85
Updating : cronie-anacron-1.4.11-20.el7_6.x86_64 17/85
Installing : python-chardet-2.2.1-1.el7_1.noarch 18/85
Installing : python-kitchen-1.1.1-5.el7.noarch 19/85
Installing : yum-utils-1.1.31-50.0.1.el7.noarch 20/85

IMPORTANT: A legacy Oracle Linux yum server repo file was found.
Oracle Linux yum server repository configurations have changed which
means public-yum-ol7.repo will no longer be updated. New repository
configuration files have been installed but are disabled. To complete
the transition, run this script as the root user:


See for more information.

Installing : oraclelinux-release-el7-1.0-3.el7.x86_64 21/85
Updating : rhn-client-tools-2.0.2-24.0.5.el7.x86_64 22/85
Updating : ipset-libs-6.38-3.el7_6.x86_64 23/85
Updating : selinux-policy-3.13.1-229.0.1.el7_6.6.noarch 24/85

[ ... more output ...]

The message that “A legacy Oracle Linux yum server repo file was found” started this blog post. So what is there to be done? The upgrade created a few more files in /etc/yum.repos.d/:

[ansible@server3 ~]$ ls -l /etc/yum.repos.d/
total 28
-rw-r--r--. 1 root root 3354 Jan 22 16:14 oracle-linux-ol7.repo.disabled
-rw-r--r--. 1 root root 13093 Nov 2 07:02 public-yum-ol7.repo
-rw-r--r--. 1 root root 2116 Jan 22 16:14 uek-ol7.repo.disabled
-rw-r--r--. 1 root root 226 Jan 15 21:31 virt-ol7.repo.disabled
[ansible@server3 ~]$

The files ending in *disabled are not considered eligible during any execution of “yum”.

Transitioning to the new model

According to the following steps are only needed if a) you have public-yum-ol7.repo in use and the new configuration files – provided by oraclelinux-release-el7 in my case – are present as well. This applies to this VM, so I decided to go ahead and call the script /usr/bin/ to see what happens.

[root@server3 ~]# /usr/bin/
Repository ol7_UEKR5 Fine
Repository ol7_latest Fine
[root@server3 ~]# ls -l /etc/yum.repos.d/
total 28
-rw-r--r--. 1 root root 3354 Jan 22 16:14 oracle-linux-ol7.repo
-rw-r--r--. 1 root root 13093 Nov 2 07:02 public-yum-ol7.repo.sav
-rw-r--r--. 1 root root 2116 Jan 22 16:14 uek-ol7.repo
-rw-r--r--. 1 root root 226 Jan 15 21:31 virt-ol7.repo

It appears as if switched the all-in-one configuration for the new, modular one.


In other posts of mine I described how I’m upgrading public-yum-ol7.repo from Oracle’s yum server in my lab (and only in the lab!). Based on the monolithic file I can call yum-config-manager to enable and disable any repository I need. With the new modular approach I might have to rethink this approach. The Administration Guide I referred to earlier has more details about the details of the change.